10 ton clicker press

10 ton clicker press is the cutting pressure power have 10 tons .In fact ,Gerson machinery have 5 tons from 28 tons clicker press machine for die cutting soft and semi-rigid material.

10 ton clicker press
10 ton clicker press

The following 10 ton clicker press features:

1. Rotation of swing arm is flexible, and operation and materials selection is convenient.

2. High quality seamless steel tubes are adopted and processed into pillars, which are supported by top and bottom holes, to guarantee the flexible rotation and good reliability of upper beating board.
3. The switch is operated by both hands to guarantee the safety of operators.
4. The position of rocker can be adjusted by the hand wheel at the top of machine and the cutting stroke is adjusted by timer so that the optimal cutting position can be achieved easily, the working efficiency is enhanced, and the service life of die cutter and cushion board is prolonged.

5. The inertial of flying wheel is used to store energy, which saves the energy.

Model GSB-8 GSB-10
Maximum   Cutting Force 8Tons 10Tons
Cutting speed 0.085m/s 0.085m/s
Adjustable stroke 5-60mm 5-60mm
Tension distance 60-130mm 60-130mm
Cuttting table size 650×330mm 800×400mm
size 660×780×1500mm 660×780×1500mm
Motor Power 0.75KW 0.75KW
Net Weight (N.W.) 550Kgs 600Kgs
Tags: ,

Copyright © 2021 Gerson machinery-die cutting machine,hydraulic press manufacturer | Design by Gerson die cutting machine
top