20 ton hydraulic swing arm cutting machine

Gerson machinery 20 ton hydraulic swing arm cutting machine

20 ton hydraulic swing arm cutting machine
20 ton hydraulic swing arm cutting machine

This kind of  hydraulic swing arm cutting machine have

1.The machine is applicable to cutting of various nonmetal materials by die cutter.
2.The oil way system specially designed can conveniently adjust the rocker height. Noadjustment is needed after the height of die cutter is changed.
3.High speed and low energy consumption. With only power of 0.75kw. It can output the cutting force of 20 or 22 Tons, and 27 Tons.
4.To meet the need of frequent replacement of die cutters of different sizes, another type of machine that can timely output three kinds of cutting force is available for selection.
5.Packing:12sets/20″container;26sets/40″container

Also have others swing arm cutting machine GSB-8/10,GSB-2C,GR-20/27 etc.,

Three different cutting pressures for your custom cutting choice.These will enable the application of different sized (surface area) dies with virtually no repeating adjustments.So certainly will Improve your cutting efficiency with multi production.

Model GRA-220/3 GRA-270/3 GRA-270M/3 GRA-270L/3
Maximum cutting force 20 or 22T 27T 27T 27T
Table area 900×430mm 1000×500mm 1000×500mm 1000×500mm
Swing arm width 370mm 370mm 500mm 610mm
Cutting stroke 90mm 90mm 90mm 90mm
Motor power 1.1KW 1.5KW 1.5KW 1.5KW
Electric Supply Voltage 3×440/415/400/380/220/200V, 50/60 Hz
Single phase 240V/220V, 50/60 Hz
Packing size 1050×1000×1500mm 1150×1200×1500mm 1150×1200×1500mm 1150×1200×1500mm
N.W(with oil) 650kg 960Kg 1050kg 1200kg
G.W 740kg 1120Kg 1210kg 1360kg
Tags: ,

Copyright © 2021 Gerson machinery-die cutting machine,hydraulic press manufacturer | Design by Gerson die cutting machine
top